No. 1
Rated current iral
Like ordinary fuses, it ensures that it can work normally at 100%rated current and does not melt. Usually test at a 40 -degree heat balancing state. When the rated current is 2 times, the fuse time is less than 1 minute.
No. 2
Cells in Series
The amount of this number is related to the battery voltage that needs to be protected, that is, the voltage action option of overvoltage.
No. 3
Maximum working voltage VMAX
This voltage is a reliable voltage that can be reliably separated, which complements the maximum segmentation current.
No. 4
Break current IBREAK
This current is the current that the fuse can be reliably separated, that is, the breaking capacity of the fuse, which may exceed the abnormal conditions such as the frying tube.
No. 5
Action voltage VOP
When the circuit crossing the voltage occurs, the MOSFET will turn on the heater and the fuse to form a circuit. By heating fuses, it will protect it. This voltage is matched with the heater. Below the voltage value may cause the melting time to be too long or not even fuse, and exceeding the voltage value may cause the heater to damage, and the fuse cannot be guaranteed.
Contact Person: Mr. CK Loh
Tel: +86 188 139 15908
Fax: 86--755-28397356
