company news about Auto fuse replacement skills and precautions

01 If there is no spare fuse, you can use other idle fuse tops. For example, the fuse of the window is broken, and there is no spare fuse. At this time, you can use the idle fuses such as audio and air conditioners, provided that the rated current of the two is the same or higher than the original fuse.

02 Install high -power car lights. After changing the headlights, the power is very easy to melt the fuse. The large current fuse and power cord should be replaced in time to prevent the current from being too large and overheat.
03 Modification high -power audio. Ultra -power audio also melts the fuse. When installing high -power electrical appliances, you must pay attention to the size of the electrical current and replace the corresponding fuse in time. Generally, good modification stores will pay attention to such problems.

04 Rinse the engine compartment with water. When cleaning the engine compartment, because the fuse box is not very appropriate, remember not to rinse the fuse box directly with water, otherwise it will easily lead to short circuit of the fuse, causing the vehicle electrical component to fail. Most fuse boxes have obvious icons for rinse with water. If the fuse box is dirty, gently scrub with a wet towel.
05 cigarette lighters for high -power electrical appliances. The cigarette fuse is easy to melt. Generally, a fuse of 15 to 25A specifications is used. Because the vehicle voltage is 12V, the electrical appliances are recommended by the cigarette lighter for no more than 300W, and some small cars do not exceed 200W. As for the high -power electrical appliances such as vehicle refrigerators and vehicle refrigerators, vehicle inflatable pumps, etc., use less electrical appliances.